Switch, On/Off
|
|
|
On/Off circuit breaker switch.
***NOTE*** This switch can come with 2 or 3 prongs. The third prong is only a ground. Therefore, the two or three prong will be interchangeable and can be used in place of one another. If you have the three prong and receives the two, you simply need to attach the ground to the machine. ** |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | Screw | 19 | 2 | M4 X 25MM SCREW | 4 | 3 | Screw | 2 | 4 | Screw | 2 | 5 | Screw | 4 | 6 | Screw | 4 | 7 | Washer, Star | 1 | 8 | Washer, Locking | 4 | 9 | Nut | 2 | 10 | Washer | 4 | 11 | Screw | 5 | 12A | Screw | 13 | 12B | Screw | 2 | 13 | Screw | 3 | 14 | M8 X 35MM SCREW | 2 | 15 | Screw | 2 | 16 | Screw | 2 | 17 | Screw | 2 | 18 | Screw | 1 | 19 | Screw | 1 | 20 | Screw | 2 | 21 | Screw | 1 | 22 | Screw | 7 | 23 | Screw | 8 | 24 | Screw | 2 | 25 | Screw | 2 | 26 | Screw | 1 | 27 | Screw | 1 | 28 | Screw | 4 | 29 | Washer | 2 | 30 | Washer, Flat | 2 | 31 | Nut, Nylock | 3 | 32 | Nut, Motor | 2 | 33 | Nut, Locking | 4 | 34 | Wrench, Allen | 1 | 35 | PLATFORM CUSHION | 2 | 36 | Nut | 2 | 37 | Tinnerman Clip | 3 | 38 | CAGE NUT | 4 | 39 | NLA Rail, Deck, Left | 1 | 40 | Wire Harness | 1 | 41 | Guide, Belt | 2 | 42 | Magnet | 1 | 43 | Belt, Drive | 1 | 44 | DRIVE ROLLER/PULLEY | 1 | 45 | Treadbelt | 1 | 46 | WALKING PLATFORM | 1 | 47 | NLA Rail, Foot, Right | 1 | 49 | Decal, Warning | 1 | 50 | Spacer | 2 | 51 | NLA Foot, Left | 1 | 52 | NLA Foot, Rear, Right | 1 | 53 | Cover, Motor | 1 | 54 | RPM sensor | 1 | 55 | Retainer Clamp | 1 | 56 | Wheel | 2 | 57 | Wire, Jumper, Black | 1 | 58 | Motor, Incline | 1 | 59 | NLA Bracket, Roller, Rear | 2 | 60 | NLA Motor, Drive | 1 | 61 | Bracket, Motor | 1 | 62 | Wire tie | 3 | 63 | Frame, Lift | 1 | 64 | Hex Nut | 2 | 65 | Power Cord | 1 | 66 | CNTRLR,MC2100LTS-30,ARPS,INTL | 1 | 67 | Grommet, Strain Relief | 1 | 68 | Switch, On/Off | 1 | 69 | Cover, Motor, Lower | 1 | 70 | Washer, Star | 2 | 71 | Bracket, Latch | 1 | 72 | Pin, Latch | 1 | 73 | LEFT UPRIGHT | 1 | 75 | Wire Harness | 1 | 76 | Screw | 2 | 77 | Wire Harness | 1 | 78 | RIGHT UPRIGHT | 1 | 79 | Spacer | 4 | 80 | Spacer, Upright, Right | 1 | 81 | Bumper, Leveler | 4 | 82 | Endcap, Base | 2 | 83 | LEFT UPRIGHT SPACER | 1 | 84 | Decal, Warning | 2 | 85 | UPRT,BASE,ARPS,INTL | 1 | 86 | Wheel | 2 | 87 | Console, Display | 1 | 88 | CNSL,BASE,GIAMBI 30,EBONY | 1 | 89 | Handlebar, Left | 1 | 90 | HB,1 BEND,RT,ARPS | 1 | 91 | Endcap | 2 | 92 | Cable Tie, Mounting | 2 | 93 | Safety Key | 1 | 94 | Wire Tie | 2 | 95 | Cable Tie | 10 | 97 | Door, Access | 1 | 98 | Clamp, Cable, Long | 1 | 99 | Spacer | 1 | 100 | RLR,IDLER,1.6 | 1 | 101 | Screw | 4 | 102 | Wire, Jumper | 1 | 103 | End Cap, Rectangle, Internal | 2 | 104 | Spacer | 2 | 105 | Tool, Wrench | 1 | 106 | Tool, Belt Adjustment | 1 | 107 | Clamp, Console, Rubber | 4 | 108 | Wire, Green | 1 | 109 | PULSE SUPPORT | 1 | 110 | CNSL,CUPHOLDER,LT | 1 | 111 | CNSL,CUPHOLDER,RT | 1 | 112 | Endcap, Handrail | 2 | 114 | PULSE PLATE KIT | 1 | 115 | Clip | 1 | | CN, TURN OFF DEMO MODE | 1 | | PLATE,INCLN,1.19X1.05" 162344C | 1 | | Wire harness, 20" | 1 | | WIRE,JMPR,006",Black,M/F 114011D | 1 | | Wire, Jumper, 6", Red | 1 | | Wire Harness, Jumper, Blue 6" | 1 | | Wire, Jumper, Blue | 1 | | DECAL,WARN,SURGE | 1 | | TECH SHEET | 1 | | Envelope | 1 | | Manual, Owner's, English | 1 | | USER'S MANUAL, SPANISH | 1 | | LITPAC,HMTL578080,CWL | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | Accessory Kit | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | | NLA Heart Rate monitor, kit | 1 | |
|
