Switch, On/Off
|
|
|
On/Off circuit breaker switch.
***NOTE*** This switch can come with 2 or 3 prongs. The third prong is only a ground. Therefore, the two or three prong will be interchangeable and can be used in place of one another. If you have the three prong and receives the two, you simply need to attach the ground to the machine. ** |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | HOOD,HMTL39906,ARPS | 1 | 2 | Screw | 24 | 3 | Belt, Drive | 1 | 4 | Screw | 2 | 5 | Endcap, Rear, Right | 1 | 6 | Washer | 1 | 7 | Upright, Left | 1 | 8 | NLA Motor, Drive | 1 | 9 | FOOT RAIL COVER | 2 | 10 | Speed sensor | 1 | 11 | Decal, Warning | 1 | 12 | Bushing, Pivot | 2 | 13 | Nut, Nylock | 9 | 14 | Screw | 2 | 15 | Screw | 2 | 16 | Endcap, Round, Internal | 2 | 17 | NLA Roller, Front | 1 | 18 | Magnet | 1 | 19 | Screw | 1 | 20 | Screw | 2 | 21 | Screw | 2 | 22 | Tinnerman Clip | 3 | 23 | Grommet, Strain Relief | 1 | 24 | Washer, Lock | 1 | 25 | Screw | 10 | 26 | Screw | 1 | 27 | Fan | 1 | 28 | Nut, Motor | 2 | 29 | Bracket. Latch | 1 | 30 | Latch | 1 | 31 | Foot, Rear, Left | 1 | 32 | Screw | 2 | 33 | Screw | 6 | 34 | Plate, Grip, Left | 1 | 35 | Wire harness | 1 | 36 | Arm, Console, Right | 1 | 37 | Screw | 8 | 38 | Grill, Fan, Back | 1 | 39 | Screw | 8 | 40 | Wire, Jumper | 1 | 41 | Washer, Star | 1 | 42 | Wire harness | 1 | 43 | Display, Console | 1 | 44 | Plate, Rear roller | 2 | 45 | Holder, Book | 1 | 46 | NLA Nut, Leg | 4 | 47 | CNSL,BASE,ARPS | 1 | 48 | Screw | 6 | 49 | Cable Tie, Mounting | 1 | 50 | Safety Key | 1 | 51 | Motor, Incline | 1 | 52 | Washer, Flat | 2 | 53 | INCLINE MOTOR BOLT, LOWER | 1 | 54 | Screw | 2 | 55 | Wire Harness, Filter | 1 | 56 | Wire Harness, Incline | 1 | 57 | Bumper, Leveler | 4 | 58 | Screw, Self Drilling | 5 | 59 | Controller, MC2100-12A | 1 | 60 | LIFT FRAME | 1 | 61 | FOOT,FRONT,Black 204005- | 2 | 62 | Decal, Warning | 2 | 63 | Leg, Extension | 2 | 64 | Screw | 2 | 65 | Endcap, Rectanglar, Internal | 2 | 66 | Wheel | 2 | 67 | Nut | 2 | 68 | Cable Tie | 6 | 69 | UPRIGHT BASE | 1 | 70 | Clamp, Cable, Long | 2 | 71 | Handrail, Left | 1 | 72 | RIGHT HANDRAIL | 1 | 73 | Screw | 1 | 74 | LEFT FOOT RAIL | 1 | 75 | Screw | 5 | 76 | Screw | 2 | 77 | Screw | 5 | 78 | Bracket, Stop | 1 | 79 | Power Cord | 1 | 80 | NLA Bracket, Roller, Rear | 2 | 81 | Cover, Motor, Lower | 1 | 82 | Guide, Belt | 2 | 83 | Screw | 4 | 84 | Fastener, Cushion, Platform | 4 | 85 | NLA Spring, Deck | 2 | 87 | Wire Tie | 1 | 88 | Switch, On/Off | 1 | 89 | Clamp, Wire | 4 | 90 | RIGHT UPRIGHT | 1 | 91 | Retainer Clamp | 1 | 92 | Bracket, PWR INLET,Black 202848B | 1 | 93 | Washer | 1 | 94 | Tool, Belt Adjustment | 1 | 95 | Washer | 12 | 96 | Treadbelt | 1 | 97 | NLA Deck | 1 | 98 | Rail, Deck, Right | 1 | 99 | Nut | 8 | 100 | NLA Roller, Rear | 1 | 101 | Optical Disk | 1 | 102 | RPM Sensor | 1 | 103 | Bracket, Motor | 1 | 104 | Pin, Latch | 1 | 105 | Nut, Locking | 1 | 106 | Screw | 1 | 107 | ENDCAP,INT,RND,1.5 201469A | 2 | 108 | INCLINE MOTOR BOLT, UPPER | 1 | 109 | Wire, Console Pulse | 1 | 110 | Plate, Pulse, Left | 1 | 111 | Plate, Pulse, Right | 1 | 112 | Washer, Lock | 2 | 113 | Wire tie | 1 | | Wire Harness, Jumper, Black | 1 | | WIRE,JMPR,008",GRN,F/R 190907B | 1 | | Wire Harness, Red | 1 | | Wire Harness, Blue | 2 | | LIT,HMTL39906,TECHSHT | 1 | | Envelope | 1 | | Decal, Motor Cover | 1 | | DECAL, CNSL,"HEALTHRIDER" | 1 | | Decal, Motor Cover | 1 | | Manual, Owner's,HMTL399061,ENG | 1 | | Manual, Owner's, Spanish | 1 | | LITPAC,HMTL399061 | 1 | | HARDWARE KIT | 1 | | Accessory Kit | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | | NLA Heart Rate monitor, kit | 1 | |
|
